Checking the oil level (Continuous control) The oil level should be checked every second refueling. In case of preparing for a long trip or in the presence of an old engine with increased oil...
Engine oil change Oil change interval Audi recommends changing the oil annually or every 15,000 km (gasoline engines) and 7,500 km (diesel engines), if the annual mileage...
Checking the oil level in transmission units Checking the gearbox for tightness In the gearbox, oil is not consumed as in the engine, but it can leak out in loose bridges. If on the crankcase the...
Ignition distributor lubrication Although Audi has a maintenance-free transistorized ignition system, the ignition distributor must be lubricated (the exception is cars with a fully electronic...
Lubrication of rods, hinges and locks The Audi maintenance plan includes a few lubrication jobs on the bodywork. It is also necessary to perform unscheduled lubrication if something sticks, creaks...
Operation of the lubrication system The engine is provided with oil by means of a circulating lubrication system. The countershaft driven gear pump is located at the bottom of the engine sump....
Removal and installation of the oil pan The oil pan can be removed with the engine installed. Operations are described for all engines. Any deviations are listed separately. Place the vehicle in...
Oil pump Oil pump parts 1 Drive unit for distributor (if it is installed) 2 Oil pump drive 3 Oil pump housing 4 Pinion with shaft 5 Gate valve 6 driven gear 7 Spring 8...
Oil pressure check The oil pressure in the engine can be measured with a pressure gauge, which must have an adapter that is screwed into place of the oil pressure warning light...
Checking off the oil pressure warning lamp Start the engine. The oil pressure warning light should go out. Disconnect the wire from the control lamp switch An Audi pressure gauge is used to check the...
Oil radiator 1 Bolt, 25 Nm 2 Oil filter base 3 O-ring 4 Oil cooler 5 Nut, 25 Nm 6 Oil filter All engines use an oil cooler to cool the engine oil, which is installed...
Oil temperature measurement Measurement of oil temperature must be carried out when performing various adjustments using the MKM-596 device. The oil temperature must be measured at a...