Controls and control devices (until 1988) 1 Side window blower 2 Lever for changing airflow direction 3 Air flow regulator 4 Speaker grille 5 Turn signal lever 6 Outdoor light switch 7 Fuel gauge 8...
Controls and control devices (since 1988) 1 Air flow regulator 2 Side window blower 3 Airflow direction change lever 4 Speaker grille 5 Turn signal lever 6 Outdoor light switch 7 Coolant temperature...
Keys The car comes with three keys: Two keys A and key B. A - Master Key This key fits all vehicle locks. The main key is backlit. To turn on the backlight, press...
Hood lock mechanism The hood lock lever is located on the left under the instrument panel (see photo). The lever opens the hood lock if you pull it towards you. In this case, the...
Glass Power windows Mechanical drive The windows are opened and closed by turning the power window handle. Electric drive The power windows only work when the...
Rear view mirrors Mechanical drive of an external rear-view mirror Adjustment is made by lever (see photo) Electric drive of an outside rear-view mirror Adjustment of the left...
Seats The front seats are separate with individual adjustment of the longitudinal position of the seat and backrest. To adjust the longitudinal position of the seat,...
Electric seat adjustment The switches are located on the outside of the seat (see photo). The electrical adjustment also functions when the ignition is switched off. Attention: Due to...
Luggage extension (Avant) To increase the volume of the luggage compartment, fold the rear seat backrest forward. The back of the rear seat is unlocked with levers (see photo, arrow A)....
Luggage compartment cover (Avant) Closure To close the folded cover, pull it out evenly to the end of the guides. For fixing, insert the protrusions on the corners of the cover into the grooves...
Trunk hatch The hatch is designed to carry skis or other long items (see photo). Open the trunk lid. Free the middle of the luggage compartment from the luggage. Press key...
Headrests Adjustment Grasping the head restraint on the sides, move it up or down so that the top edge of the head restraint is at eye level (see photo). Removal and...
Parking brake lever The lever is located between the front seats (see photo). If the ignition is on and the parking brake is applied, the parking brake warning lamp should be on....
Gear shift lever Engaging reverse Reverse gear can only be engaged when the vehicle is stationary. The lever must be pressed down, while the reversing lights should light up. E...
Automatic transmission P - Parking Mechanical blocking of wheels. transfer «R» can only be switched on when the vehicle is stationary. R - Reverse transfer «R» can only be switched...
Egnition lock 1. The ignition key can be inserted and removed freely. 2. Ignition. 3. Turn on the starter. For all car models: Position 1: In this position, the steering...
Adjusting the idle speed of a cold engine To reduce the vibration of a cold engine at idle, it is necessary to correct the idle speed with the regulator shown in the photo. Zoom: clockwise rotation...
Pilot lamps 1 - ABS system The control lamp works at the included ignition. The lamp lights up when the ABS system is turned on. 2 — DIESEL (on diesel models) The control...
Onboard control system (BSK) BSK was installed on some cars by order. This system automatically controls various functions and the operation of the most important parts of the car....
Checking the performance of the BSC With the ignition on and the engine off, briefly press the button located under the coolant temperature gauge (indicated by the arrow in the figure), then...
Application of BSC After starting the engine, the display will show «Bremslicht» («Stop signal»), which should go out after pressing the brake pedal. If the tested node or...
Control devices Speedometer On the speedometer (see picture) there is a daily counter of the distance traveled and a summing counter of the distance traveled. The least...
On-board computer Some car models are equipped with an on-board computer on request. The on-board computer is turned on with a button located to the left of the central...
Programmable speed controller Some vehicle models are optionally equipped with a programmable speed control system. The regulator ensures that the speed selected by the driver is...
Switches 1 — Switches/regulators of heating of forward seats (there are six positions for adjusting the seat temperature). 2 - Switch for fog lights and rear fog light....
Heating and airflow control panel Controls Handle A - for adjusting the air temperature To the right, more. To the left, less. Lever B - to adjust the strength of the air flow. Lever all the...
Automatic air conditioner Automatic air conditioning provides automatic temperature control, ventilation intensity and distribution of incoming air depending on the temperature selected...
Luke Hatch mechanical drive To open the sunroof in the vertical direction, press the button «PRESS» at the base of the handle and turn the handle to the left....
Interior heating: general recommendations For normal operation of the interior heating and ventilation systems, make sure that the air intake cavities located in front of the windshield are not covered...
Air conditioner care tips Remember! The air conditioner turns on automatically only when the air temperature is about +5°C. At lower temperatures, its use is simply impractical. The air...
Description of Quattro models Introduction The Audi 100 Quattro/100 Avant Quattro are efficient, versatile vehicles with extremely good driving characteristics. The all-wheel drive chassis...
Starting the engine (carbureted models) Starting a cold engine The carburetor has a starting device that must be turned on when the engine is cold. starting thrust (damper) has 4 positions. It is...