Electric seat adjustment drive (Audi 100 C3)

Table of contents: Selecting fixed seat positions (from… ↓ Remembering the set seat position ↓

The switches are located on the outside of the seat (see photo). The electric adjustment also functions when the ignition is off.

Caution: Since the seats can be adjusted with the ignition off, do not leave children unattended in the vehicle.

Switch A:

Up: The front of the seat rises Down: The front of the seat falls.

Switch B:

Adjusts the seat position longitudinally and in height.

1 = higher; 3 = below; 2 = back; 4 = forward.

Switch C:

Up: The rear of the seat rises Down: The rear of the seat falls.

Switch D:

Forward: the backrest rises
Back: the backrest is lowered.

Selecting fixed seat positions (from memory)

The driver's seat has an additional 4 different positions in memory.

To select a fixed position from memory, set the "ON OFF" switch to the "ON" position (see photo), then select one of the four positions by pressing the corresponding button. Finally, set the switch to the "OFF" position.

To select a fixed position from memory, set the «ON OFF» switch to the «ON» position (see photo),…

Once a fixed position has been selected, fine adjustments can be made manually using the switches on the seat.

Remembering the set seat position

To memorize the current seat setting, simultaneously press the "Memory" button and the button with the number where you want to memorize this setting.