Clutch. General information The clutch is a single plate dry clutch with pressure plate and diaphragm spring. The clutch is actuated by a hydraulic system similar to that used in the...
Removing the clutch The clutch can be removed without removing the engine from the vehicle. Remove gearbox. Mark position of clutch in relation to flywheel. To do this, use a...
Clutch repair Check clutch disc and cover (basket) for damage or deformation. If found, replace both parts together. Check whether the driven disc springs are still in good...
Clutch installation The clutch is installed in the reverse order of removal. Particular attention should be paid to the following: When buying a clutch, you need to know the type...
Clutch release mechanism Elements of the release bearing and clutch slave cylinder and hydraulic clutch 1 gearbox (checkpoint) 2 Ball head bolt, 25 Nm 3 Intermediate piece 4 Disc 5...
Hydraulic drive system The clutch is actuated hydraulically using the master and slave cylinders. The master cylinder is located on the pedal block, fastened with two bolts and held...
Removing air from the hydraulic drive system Removal of air from the hydraulic drive system is carried out in the same way. as for the hydraulic brake drive, with the difference that the air bleed hose is...
Possible clutch malfunctions As already mentioned, the clutch can slip. In addition, the clutch can pull. In this case, the car starts to move in jerks, i.e. the transfer of power from the...