Removal and installation of a transmission Note: If for any reason the flywheel was removed from the crankshaft, tighten the mounting bolts as follows: bolts without shoulder - 98 Nm bolts with shoulder...
Gear shift mechanism Shift lever system on a manual transmission (with one pull) 1 shift lever 2 Tightening bolt of draft of a gear change Gear shift mechanism and its lever (with...
Gearbox oil level Although the gearbox is filled with long life oil, oil leaks can still occur, which can be identified by oiling the outside of the gearbox housing. In this...
General arrangement of automatic transmission External elements of a 4-speed automatic transmission 1 Carter 2 Lid 3 Casing 4 axis 5 Lever 6 Gear (hand brake) 7 Lever 8 stem 9 Activation lever 10 Lever 11...
Removal and installation of automatic transmission Withdrawal Disconnect the negative wire from the battery. Remove the upper bolts connecting the gearbox to the engine. Raise and support the vehicle securely....
Shift lever system on an automatic transmission Shiftlock II automatic transmission shift lever device 1 Selector lever knob 2 Selector lever bracket 3 Torsion spring 4 Selector lever 5 Case 6 Guide pin 7...
System switch adjustment Series 087 The accelerator control system must be adjusted so. that when the throttle is closed, the lever on the gearbox is in the off position. If the...