Steering Specifications Steering Type - Mechanical or reinforced rack and pinion. Steering shock absorber fitted on models with direct-acting Hall effect steering Tightening torques,...
Steering wheel — removal and installation Note: Do not attempt to remove the steering wheel on vehicles equipped with an airbag protection system. 1. Remove the horn button from the steering wheel...
Tie rod — removal and installation 1. Apply the handbrake, jack up the front of the car, secure it on axle stands. Remove the wheel. 2. Unscrew the ball joint nut from the outer end of the link...
Steering gear — removal and installation 1. Apply the handbrake, jack up the front of the car, secure it on axle stands. Remove wheels. 2. Disconnect the inner tie rod ends, see Chapter 20, paragraph...
Steering Gear Protective Cover — Replacement 1. Remove the steering gear as described in Chapter 21 . 2. On power steering models, remove the two hydraulic banjo connections at the end of the steering...
Steering gear — adjustment 1. If there is play in the steering gear, causing noise or rattling, the steering gear should be adjusted as follows (see fig. 10.25). 2. With the wheels in...
Power Steering Mechanism — Bleeding 1. The power steering mechanism uses hydraulic oil stored in a reservoir mounted on the bulkhead of the engine compartment. 2. The power steering pump is also...
Power Steering Mechanism — Leak Check 1. With the engine running, turn the steering wheel to the maximum angle in one direction and leave it in this position to increase the pressure in the system....
Power steering pump — removal and installation Models with 4-cylinder engine 1. Jack up the front of the car. 2. Place a container under the pump, unscrew the bungee hose connections on the pump housing....