Note: Do not attempt to remove the steering wheel on vehicles equipped with an airbag protection system.
1. Remove the horn button from the steering wheel (photo).
2. Disconnect the horn wiring, remove the key (photo).
3. Set the front wheel straight and the turn signal lever in neutral.
4. Mark position of a steering wheel and internal column concerning each other, then unscrew and remove a lock nut and a washer.
5. Remove a steering wheel from internal grooves of a column.
6. Installation is carried out in the reverse order. Align the pre-made marks, tighten the nut with a tightening torque regulated specification. Make sure the turn signal lever is in the neutral position, otherwise the switch lever may be damaged.
Visitor comments