1. Steering wheel
2. Coil spring connector
3. Airbag. Unscrew airbag using torx wrench size -T30-. Disconnect connector. Lay the Airbag in such a way that the energy-absorbing pad faces upwards. Installation: The connector should engage with an audible click. Screw on the airbag with a torque of 7 Nm. Turn on the ignition and connect the negative terminal of the battery.
4. Bolt with an internal polyhedron must be replaced
5. Torx screws (T30), 7 Nm
6. Torx key (T30)
7. Return ring with slip ring
Visitor comments