Connection plan for cooling system hoses Attention! Risk of burns from hot steam and hot coolant. When the engine is warm, the cooling system is under pressure. To release excess pressure, cover the...
Draining and refilling coolant Drain Remove the engine hood. Open cap -arrow- of coolant expansion tank. Remove the soundproofing cover, loosen the fasteners for this. Place a pallet for...
Coolant Pump — Design Description Coolant pump: 1. Coolant pump with built-in seal. ring 2. Bolt 3. Rear timing belt cover 4. Roller for the toothed belt of the main drive 5. Bolt 6. Bolts, 20...
Removal and installation of the thermostat Withdrawal Drain coolant. Carefully! Risk of damage to cable locks. Do not remove the cable locks from the shift rod lever of the intermediate lever. Removed...
Removing and installing coolant temperature sensor G62 Withdrawal The engine needs to be cold. Remove the engine hood. Briefly open the cap on the coolant expansion tank to relieve residual pressure in the cooling...
Removal and installation of a radiator Instruction. Even with proper installation, slight dents may appear on the fins of radiators and condensers. In this case, we are not talking about damage to...
Removal and installation of the fan of a radiator Withdrawal Remove the engine hood. Remove the oil dipstick from the guide tube. Remove guide tube -1- of dipstick; to do this, press the release buttons....