Attention! Risk of burns from hot steam and hot coolant. When the engine is warm, the cooling system is under pressure. To release excess pressure, cover the coolant expansion tank cap with a cloth and carefully open it. Secure all hose connections with clamps of the appropriate series. The arrows marked on the ends of the pipes and hoses of the cooling system must be opposite each other.
Connection plan for cooling system hoses:
1. Coolant pump
2. intake manifold
3. Heat exchanger of the heater, after replacement, drain the old one and fill in the new coolant
4. Expansion tank with cap
5. Coolant hose, upper
6. Radiator. After replacing, drain the old and fill in the new coolant
7. Coolant hose, lower
8. Thermostat housing
9. Cylinder head to the cylinder block, after replacing, drain the old one and fill in the new coolant
Visitor comments