Exhaust system of gasoline engine 1.4 l car Audi A2
Silencer — design description
Muffler: 1. Nut. Replace, 40 Nm 2. Seal. Replace 3. Exhaust manifold 4. Lambda probe "G39" 5. Fastening loop. Replace if damaged 6. Additional muffler 7. Clamp...
Muffler: 1. Nut. Replace, 40 Nm 2. Seal. Replace 3. Exhaust manifold 4. Lambda probe "G39" 5. Fastening loop. Replace if damaged 6. Additional muffler 7. Clamp...
Removal and installation the inlet pipe with the catalytic converter
Removal Lift the carpet in the driver's side footwell and remove the "arrow" trim. Disconnect and freely place the connector for the lambda probe after the...
Removal Lift the carpet in the driver's side footwell and remove the "arrow" trim. Disconnect and freely place the connector for the lambda probe after the...
Exhaust manifold — design description
Exhaust manifold: 1. Bolt, 10 Nm 2. Thermal insulation shield 3. Hose for preheating the intake air 4. Bolts, 10 Nm 5. Bolts, 40 Nm 6. Bracket 7. Exhaust...
Exhaust manifold: 1. Bolt, 10 Nm 2. Thermal insulation shield 3. Hose for preheating the intake air 4. Bolts, 10 Nm 5. Bolts, 40 Nm 6. Bracket 7. Exhaust...
Removal and installation the exhaust manifold
Removal Remove the engine hood. Remove the noise-insulating casing, loosen the fasteners for this. Protect the detachable element from bending with the...
Removal Remove the engine hood. Remove the noise-insulating casing, loosen the fasteners for this. Protect the detachable element from bending with the...
Exhaust Gas Recirculation System — Design Description
Exhaust gas recirculation system: 1. Bolt 2. Used throttle valve "J338" 3. Seal. Replace 4. From the electromagnetic valve 1 of the absorber with activated...
Exhaust gas recirculation system: 1. Bolt 2. Used throttle valve "J338" 3. Seal. Replace 4. From the electromagnetic valve 1 of the absorber with activated...
Removal and installation the EGR valve
Removal Unscrew the "arrow" bolts for the exhaust manifold pipe. Disconnect connector "3". Unscrew the nuts "arrows", remove pipe "1" for the EGR system, EGR...
Removal Unscrew the "arrow" bolts for the exhaust manifold pipe. Disconnect connector "3". Unscrew the nuts "arrows", remove pipe "1" for the EGR system, EGR...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections of other Audi car models:
Power unit: Exhaust systems Audi 80 B4 (1991-1996)
Power unit: Exhaust system Audi 100 C3 (1982-1990, diesel)
Power unit: Exhaust system Audi A3 Type 8L (1996-2003)
Power unit: Exhaust system Audi A4 B6 (2000-2006)
Engine repair: Exhaust system Audi A6 C4 (1994-1997)
Power unit: Exhaust systems Audi 80 B4 (1991-1996)
Power unit: Exhaust system Audi 100 C3 (1982-1990, diesel)
Power unit: Exhaust system Audi A3 Type 8L (1996-2003)
Power unit: Exhaust system Audi A4 B6 (2000-2006)
Engine repair: Exhaust system Audi A6 C4 (1994-1997)
Share information:
- General information
- Introduction to the guide
- Maintenance
- Engine 1.4 l (gasoline)
- Engine repair
- Lubrication system
- Cooling system
- Exhaust system
- Engine 1.6 l (gasoline)
- Engine repair
- Lubrication system
- Cooling system
- Exhaust system
- Engine 1.2 l (diesel)
- Engine repair
- Lubrication system
- Cooling system
- Injection and turbocharging
- Engine 1.4 l (diesel)
- Engine repair
- Lubrication system
- Cooling system
- Turbocharging system
- Supply system
- Fuel injection system
- Exhaust system
- Transmission
- Mechanical gearbox 02J
- Mechanical gearbox 02T
- Mechanical gearbox 085 DS
- Chassis
- Car suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Seats
- Doors, locks and windows
- Safety system
- Heating and air conditioning
- Electrical equipment
- Power devices
- Equipment and devices
- Wipers and washers
- Lighting and lamps
- Breakers and switches
- Electrical circuits