1. Airbag on the front passenger side. Disconnect negative terminal/battery cable. Remove glove box. Disconnect plug connection -2-.
Attention! plug connection (bipolar, red) on the front passenger's airbag must never be disconnected!
Unscrew the nut -3- (4 things.). Take out the airbag. Lay down the Airbaq with the energy absorbing pad facing up.
Installing: Make sure that connector -2- is completely (with a click) got caught up. Install Airbag. Turn on the ignition. Join (-) terminal to the battery.
2. Connector.
3. Nut (4 things.) - tightening torque 9 Nm, must be replaced after the airbag has deployed.
Disconnecting the airbag connector
Open cover -1- of connector -4-. Press locking latch -3- and remove connector -2-.
Instruction. Removal and installation of the slip ring assembly must be carried out in the middle position of the steering wheel (the front wheels are in a straight-ahead position). Return ring with slip ring, as a new spare part, fixed in the middle position with a plastic collar or a shear ring. On vehicles with an ESP sensor, the ESP sensor must be aligned in the slip ring return ring. System of diagnostics, measurement and information of a / m VAS 5051.
Visitor comments