1. Side airbag cable. Remove the side panel of the seat. Disconnect the Airbag connector "5" "Arrow". Open the cable binder "6". On vehicles with a seat cushion height adjustment mechanism: move the seat pan "4" upward. On vehicles without a seat cushion height adjustment mechanism: press the cushion upward. Pull the Airbag cable "1" forward under the seat pan. Disconnect the Airbag cable "1" from the holder "3". Open the seat back trim. Lift the seat back trim and cushion "7" upward and pull the Airbag cable "1" out of the guide. Installation: Route the Airbag cable "1" into the cushion guide "7". Secure the Airbag cable "1" to the seat side screen holder "3". Cable "1" must not be near the flywheel. Pull the Airbag cable "1" under the seat pan "4". Secure the Airbag cable "1" to the cable tie "6". Connect the Airbag plug "5" to the holder. Installation in reverse order
2. Fastening angle
3. Seat side screen holder
4. Seat base
5. Side Airbag connector
6. Cable tie
7. Pillow
[The original article is available on the online resource: audimanual.ru]