Table of contents: Removal Airbag with pyropatron on… ↓ Installation ↓
Removal Airbag with pyropatron on the front passenger side "N131" and "N132"
Turn on the ignition. Disconnect the battery ground cable with the ignition on. Remove the glove box. Disconnect the ground wire "5". Disconnect the plug connectors "2" of the squib 2 of the front passenger Airbag "N132" and "6" of the squib 1 of the front passenger Airbag "N131".
To do this, use a small screwdriver "1" to unlock the lock of the plug connector "3" and disconnect the plug connector "2" of the Airbag module.
Unscrew the nuts "1, 3, 4, 7". Remove the front passenger Airbag module "8" downwards.
Installation
Installation in reverse order, taking into account that the electrical connectors must be inserted until they stop with an audible lock. Take into account that the wires must not be pinched. Replace the front panel after the Airbag has been triggered. Connect the battery ground cable with the ignition on.
[The original article is available on the online resource: AUDIMANUAL.RU]