1. Side Airbag, front driver's side: with side squib driver's side airbag -N199- front passenger's side: with side squib front passenger's airbag -N200- Insert from above into the fabric pocket on the backrest upholstery (pocket not shown). The pocket is sewn to the upholstery; 2. Remover for attaching the side Airbag to the seat back frame; 3. Back frame; 4. Bolt. 10 Nm. Replace after each removal. The threaded hole for the bolt should be cleaned, for example, using a tap; 5. Wiring harness from the driver's side Airbag squib -N199- or the front passenger's side Airbag squib -N200- to the connector block
Removing front side airbag with squib -N199- or -N200-
Remove the front seat. Attach front seat to seat repair holder -VAS 6136-. Remove the front seat backrest. Remove the front seat backrest upholstery so that the side Airbag bolt -7- is accessible; to do this, carefully pull the upholstery -2- with the cushion -3- forward as far as possible.
Unscrew bolt -7-. Remove the side Airbag -6- using a puller -5- from the backrest frame -4- and place it in the pocket -1- sewn to the upholstery. Remove the upholstery with the cushion from the backrest and remove the side Airbag.
Installation
Installation is in reverse order, taking into account that el. The connectors must be inserted all the way until they click into place. Clean the threaded hole for the bolt -7-, for example, using a thread cutter. Replace the bolt after each removal. Connect the battery ground cable with the ignition on.
Visitor comments