Vehicle ventilation and heating Audi Q5 (8R)
Removal the compressor from the mount and installing it (cars with 4-cyl. engine and 6-cyl. TDI engine)
Instructions. The compressor on a car with a 4-cyl. engine and a 6-cyl. TDI engine can be removed and installed without opening the refrigerant lines. For cars...
Instructions. The compressor on a car with a 4-cyl. engine and a 6-cyl. TDI engine can be removed and installed without opening the refrigerant lines. For cars...
Replacing the air conditioner compressor pulley
Instructions. At the start of production, compressors of the brand "Denso" of the type "6 SEU14" were installed on cars with 4 "cyl. and 6" cyl. engines. It is...
Instructions. At the start of production, compressors of the brand "Denso" of the type "6 SEU14" were installed on cars with 4 "cyl. and 6" cyl. engines. It is...
Overview of the coolant circuit components
HD = high pressure side ND = low pressure side The arrows show the direction of refrigerant flow. 1. Air conditioning compressor regulating valve "N₂80" 2....
HD = high pressure side ND = low pressure side The arrows show the direction of refrigerant flow. 1. Air conditioning compressor regulating valve "N₂80" 2....
Removal the refrigerant pressure and temperature sensor
Removal the refrigerant pressure and temperature sensor -G395, checking the signal Note. If the refrigerant pressure and temperature sensor "G395" is removed,...
Removal the refrigerant pressure and temperature sensor -G395, checking the signal Note. If the refrigerant pressure and temperature sensor "G395" is removed,...
Replacing the belt pulley together with the magnetic clutch
Replacing the belt pulley together with the magnetic clutch "N₂5" Note: If the pulley overload protection has been triggered, check the compressor for ease of...
Replacing the belt pulley together with the magnetic clutch "N₂5" Note: If the pulley overload protection has been triggered, check the compressor for ease of...
Removal the clutch disc
Turn off the ignition. Perform preparatory work when replacing the belt pulley. Remove the cap "A". Hold the compressor drive shaft "B", for example, with an...
Turn off the ignition. Perform preparatory work when replacing the belt pulley. Remove the cap "A". Hold the compressor drive shaft "B", for example, with an...
Components of the air conditioning control and regulation system outside the passenger compartment
Instructions. If there is a fault in the climate control system, the fault memory of the climate control system display panel, the Climatronic control unit...
Instructions. If there is a fault in the climate control system, the fault memory of the climate control system display panel, the Climatronic control unit...
Removal the outside temperature sensor
Removal the outside temperature sensor "617" Instructions. The value measured by the outside temperature sensor "G17" is processed by the on-board network...
Removal the outside temperature sensor "617" Instructions. The value measured by the outside temperature sensor "G17" is processed by the on-board network...
Elements outside the cabin, set of elements
I 1. Refrigerant line with internal heat exchanger. In this line, the liquid warm refrigerant (on the pressure side) gives off energy to the cold vaporous...
I 1. Refrigerant line with internal heat exchanger. In this line, the liquid warm refrigerant (on the pressure side) gives off energy to the cold vaporous...
Elements outside the cabin, set of elements
Elements outside the cabin, set of elements "3". 1. Coolant circulation pump "V50" (water pump "V36"). "V50" "V36" is installed only on vehicles with the...
Elements outside the cabin, set of elements "3". 1. Coolant circulation pump "V50" (water pump "V36"). "V50" "V36" is installed only on vehicles with the...
Removal the air composition sensor
Removal the air composition sensor "G238" Instructions. The air composition sensor "G238" is installed only on cars with climate control, the "Comfort" system....
Removal the air composition sensor "G238" Instructions. The air composition sensor "G238" is installed only on cars with climate control, the "Comfort" system....
Checking, cleaning, removing the water drainage box and installing gutters
Instructions. The following figure shows the arrangement of units and components for Audi A4, Audi Q5, etc. There are minor differences in the arrangement of...
Instructions. The following figure shows the arrangement of units and components for Audi A4, Audi Q5, etc. There are minor differences in the arrangement of...
Parts and units for controlling and regulating the air conditioner in the cabin
Instructions. If there is a fault in the climate control system, the fault memory of the climate control system display panel, the Climatronic control unit...
Instructions. If there is a fault in the climate control system, the fault memory of the climate control system display panel, the Climatronic control unit...
Removal the climate control and display unit, installation, Climatronic control unit «J255»
On the Audi Q5, an additional cover "B" is provided for the control and display unit, the Climatronic control unit "J255" "A" As a spare part, this trim "B" is...
On the Audi Q5, an additional cover "B" is provided for the control and display unit, the Climatronic control unit "J255" "A" As a spare part, this trim "B" is...
Removal the temperature sensor fan on the instrument panel «V42»
Instructions. For both versions of the control and display unit climate, installation, control unit Climatronic "J255" ("Basis" "E" and 'Komfort' "F") are...
Instructions. For both versions of the control and display unit climate, installation, control unit Climatronic "J255" ("Basis" "E" and 'Komfort' "F") are...
Removal the cabin filter
Instructions. Cabin filter is available in different versions (with or without activated carbon filter insert). On cars with the "Komfort" climate control...
Instructions. Cabin filter is available in different versions (with or without activated carbon filter insert). On cars with the "Komfort" climate control...
Air conditioner and air intake box elements
Air conditioners come in various designs (for cars with climate control, "Komfort" or "Basis" installation, etc.). Instructions. In this car, programming and...
Air conditioners come in various designs (for cars with climate control, "Komfort" or "Basis" installation, etc.). Instructions. In this car, programming and...
Removal the air intake box of the air conditioner
Turn on ignition. Set air flow direction on control and display unit, Climatronic control unit "J255" climate, settings, to "DEF" (to the windshield). Move the...
Turn on ignition. Set air flow direction on control and display unit, Climatronic control unit "J255" climate, settings, to "DEF" (to the windshield). Move the...
Disassembly and assembly of the air intake box of the air conditioner
Remove the air intake box. I 1. Foam polymer seal. For insulation of the fresh air intake shaft to the car, glued to the air intake shaft; 2. Air intake shaft....
Remove the air intake box. I 1. Foam polymer seal. For insulation of the fresh air intake shaft to the car, glued to the air intake shaft; 2. Air intake shaft....
Preliminary work before removing the heat exchanger
Turn on ignition. Set air flow direction on control and display unit, Climatronic control unit "J255" climate, settings, to "DEF" (to the windshield). Move the...
Turn on ignition. Set air flow direction on control and display unit, Climatronic control unit "J255" climate, settings, to "DEF" (to the windshield). Move the...
Removal the heat exchanger
Instructions: Factory heat exchanger due to limited space with front panel installed (and installed air conditioning) due to the presence of the "B" and "C"...
Instructions: Factory heat exchanger due to limited space with front panel installed (and installed air conditioning) due to the presence of the "B" and "C"...
Air duct and air distributor in the cabin
Instructions. Passenger compartment ventilation is provided through 2 ventilation frames (in the trunk on the left and right in the bumper area) (forced...
Instructions. Passenger compartment ventilation is provided through 2 ventilation frames (in the trunk on the left and right in the bumper area) (forced...
Disassembly and assembly of the air conditioner
I 1. Screw; 2. Coolant pipe holder; 3. Evaporator body; 4. Coolant supply pipe. Coolant flow from the engine; 5. Coolant supply pipe. Coolant return flow to...
I 1. Screw; 2. Coolant pipe holder; 3. Evaporator body; 4. Coolant supply pipe. Coolant flow from the engine; 5. Coolant supply pipe. Coolant return flow to...
Disassembly and assembly of the air conditioner
I 1. Screw; 2. Coolant pipe holder; 3. Evaporator body; 4. Coolant supply pipe coolant flow from the engine; 5. Coolant supply pipe for coolant return flow to...
I 1. Screw; 2. Coolant pipe holder; 3. Evaporator body; 4. Coolant supply pipe coolant flow from the engine; 5. Coolant supply pipe for coolant return flow to...
Disassembly and assembly of the evaporator housing
Remove the evaporator housing from the air conditioner (air conditioner of the "Basis" version, disassembly and assembly) or (air conditioner of the "Komfort"...
Remove the evaporator housing from the air conditioner (air conditioner of the "Basis" version, disassembly and assembly) or (air conditioner of the "Komfort"...
Overview of the components of the autonomous car heater
Note: Perform guided fault finding for the auxiliary heater. Guided fault finding for the auxiliary heater is performed, for example, using the diagnostic...
Note: Perform guided fault finding for the auxiliary heater. Guided fault finding for the auxiliary heater is performed, for example, using the diagnostic...
Keys and control lamps of the remote (radio) control of the independent heater
Note: The remote radio control device for the independent heater has several versions (with different transmitting signals, so pay attention to strict...
Note: The remote radio control device for the independent heater has several versions (with different transmitting signals, so pay attention to strict...
Fuel selection for an autonomous heater
Note. The presence of air in the fuel system of the independent heater may lead to combustion process disturbances. To prevent air from being sucked in and...
Note. The presence of air in the fuel system of the independent heater may lead to combustion process disturbances. To prevent air from being sucked in and...
Connecting an autonomous heater
An indication. Depending on the vehicle design and the engine, a non-return valve can also be integrated into the coolant circuit. Through this check valve, a...
An indication. Depending on the vehicle design and the engine, a non-return valve can also be integrated into the coolant circuit. Through this check valve, a...
Removal the circulation pump of the independent heater
Removal the circulation pump "V55" Note. Depending on the vehicle equipment, the circulation pump V55 is also controlled by the auxiliary heater control unit...
Removal the circulation pump "V55" Note. Depending on the vehicle equipment, the circulation pump V55 is also controlled by the auxiliary heater control unit...
Removal the independent heater
Request coding and adaptation of the additional heater control unit "J364" via the "Replace control unit" function in the guided fault finding. Ignition (and...
Request coding and adaptation of the additional heater control unit "J364" via the "Replace control unit" function in the guided fault finding. Ignition (and...
Installation diagram of autonomous heater units
1. Bolt M5x80.4x. Tightening torque 6 Nm; 2/4. Housing of the fan for supplying air to the combustion chamber of the heater "V6"; 3. Bolt M4x16.4x. Tightening...
1. Bolt M5x80.4x. Tightening torque 6 Nm; 2/4. Housing of the fan for supplying air to the combustion chamber of the heater "V6"; 3. Bolt M4x16.4x. Tightening...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections of other Audi car models:
Power unit: Heating and ventilation Audi 80 B4 (1991-1996)
Body: Ventilation and heating Audi 100 C4 (1990-1994)
Body: Ventilation and heating Audi A3 Type 8L (1996-2003)
Body: Heating and air conditioning Audi A4 B8 (2007-2015)
Body: Heating and air conditioning Audi A8 D2 (1994-2002)
Body: Heating and air conditioning Audi A2 (1999-2005)
Power unit: Heating and ventilation Audi 80 B4 (1991-1996)
Body: Ventilation and heating Audi 100 C4 (1990-1994)
Body: Ventilation and heating Audi A3 Type 8L (1996-2003)
Body: Heating and air conditioning Audi A4 B8 (2007-2015)
Body: Heating and air conditioning Audi A8 D2 (1994-2002)
Body: Heating and air conditioning Audi A2 (1999-2005)
Share information:
- General information
- Operating instructions
- Maintenance
- Power unit
- Diesels 3.0 l (BUG, BUN, CAS)
- Diesels 3.0 l (CATA, CCMA)
- Diesels 3.0 l (CJGA/CJGC)
- Diesels 4.2 l (BTR, CCFA/CCFC)
- Cooling system
- Fuel and exhaust system
- Engine management system
- Starting and charging
- Transmission
- Automatic gearbox
- Drive shafts
- Chassis
- Brake system
- Front suspension
- Rear suspension
- Steering system
- Body
- Air conditioner
- Exterior
- Interior
- Electrical equipment
- Equipment and devices
- Electrical circuits
- General information
- User manual
- Power unit
- Petrol engine 2.0 l
- Petrol engine 3.2 l
- Fuel system (petrol)
- Diesel 2.0 liter (CA)
- Diesel 2.0 liter (CG/CJ/CM)
- Diesel engine 3.0 l
- Fuel system (diesel)
- Transmission
- Manual gearbox 0B1
- Manual gearbox 0B2
- Automatic gearbox 0B5
- Automatic gearbox 0B6
- Chassis
- Front suspension
- Rear suspension
- Brake system
- Steering
- Body
- Exterior
- Interior
- Doors, locks and windows
- Safety system
- Ventilation and heating
- Electrical equipment
- Power devices
- Equipment and devices
- Lighting and alarm
- Audio system
- Electrical circuits