Heating, ventilation and air conditioning system Heater and air conditioner 1 heater drive 2 fresh and ventilation air damper switch The switch is rigidly connected to the heater drive and cannot be replaced...
Removal and installation of air deflectors Withdrawal 1. To remove the air deflectors, one or two wire hooks are needed, which can be made by yourself. 2. Bend wire tool (∅ 3 mm) according to the...
Removal and installation of the leg area nozzle Withdrawal 1. Remove the shelf from the driver's side, refer to subsection Removal and installation of the pocket on the driver's side . 2. Detach the rack (A)...
Removal and installation of the fresh air fan Withdrawal 1. Remove the glove box, refer to subsection Removal and installation of a ware box . 2. Remove additional resistor, refer to subsection Removing...
Removing and installing an additional resistor Withdrawal 1. Remove the glove box, refer to subsection Removal and installation of a ware box . 2. Loosen the screw clamp on the foam cover (WITH), flip the...
Air conditioner device Type of air conditioner 1 evaporator body 2 coupler 3 air conditioner wiring harness 4 cover 5 screw clamp 6 screw 7 leg area nozzle 8 connecting rod 9 central...
Removal and installation of the compressor Warning: Do not open the cooling circuit of the air conditioner. If refrigerant comes into contact with the skin, frostbite may result. The A/C compressor can...