Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the shelf from the driver's side, refer to the subsection Removal and installation the pocket on the driver's side.
2. Disconnect the center console pillar (A).
3. Remove the connectors between the footwell nozzle and the rear heater duct (B).
4. Loosen the mounting bolts (C).
5. Remove the nozzle (D) towards the driver's side (arrow).
Installation
Installation is performed in the reverse order of removal.
(The original publication in its entirety is posted on the website: AudiManual.ru)