Withdrawal
1. Disconnect the side cover of the fuse box and remove it.
2. Remove 4 fixing screws -2-.
3. Remove 4 mounting screws -2- (refer to accompanying illustration).
4. Raise the side mounting plate -3- approx. 1 cm in the direction of the arrow and release.
5. Detach pocket at points (A), indicated in the illustration.
6. Disconnect the light switch and light range control connector.
7. Remove the pocket from the guides and remove.
Installation
1. Replace the pocket and slide it into the guides.
2. Attach the light switch and light range control.
3. Lock pocket in points (A).
4. Reinstall the side mounting plate -3- and fix it.
5. Tighten the fixing screws -1- to 4 Nm.
6. Tighten the fixing screws -2- to 4 Nm.
7. Reinstall the fuse block cover.
Visitor comments