Power and Exhaust System Specifications Warning: Individual characteristics are also given in the text of the Chapter and, if mandatory, are highlighted in bold Gasoline engines All models except...
Fuel tank, fuel pump and fuel filter 1 fuel overflow hose 2 sealing ring. Should definitely be replaced. 3 gravity valve. To remove the valve 4 ventilation tube*. to the adsorber. 5 fuel tank cap....
Removal and installation of the fuel filter Fuel filter with mounting elements and hoses Withdrawal The fuel filter -1- is located on the bottom in front of the fuel tank, looking in the direction of...
Gas Drive Adjustment Gas drive. Engines 1.6, 1.8 l, except APY 1 gas drive 2 stopper 3 gas pedal 4 spacer 5 support bushing 6 puck 7 stop screw 8 nut, 20 Nm Gasoline engine except...
Removing and installing the air filter housing Withdrawal 1. Disconnect the air supply hose -1- and plug -2- from the air mass meter. 2. Turn out bolts -4- and -5- and take out in a set the case of the air...
Connecting the fuel pump remote control for testing Fuel pump remote control connection for testing and necessary accessories 1 push contact switch 2 clamp "crocodile" (size corresponding to the battery pole) 3...
Fuel pump check The fuel pump is located in the fuel tank. Warning: Do not use open flames near the work area, do not smoke or hold any objects that are very hot. There is a...
Checking the fuel pump relay The fuel pump relay is located in the relay board, location 4, on the driver's side under the instrument cluster. It must be checked if the pump is not...