Car doors, covers and windows Audi A3 8L

Removal and installation the hood lock drive cable
Hood lock drive cable 1 - hood lock drive Removal: unscrew the mounting screws "4". disconnect cable "3" remove the hood lock drive 2 - bushing 3 - cable 4 -...

Removal and installation the hood lock
Removal 1. Disconnect the cable from the bonnet lock –2–. 2. Remove screws –1–. 3. Remove the lock from the holder –3–. Installation 1. Insert the bonnet lock...

Removal and installation the hood hook
Removal Loosen nuts –1– and remove hook –2–. Installation 1. Replace the hook and secure with nuts. 2. Tighten the nuts to 8 Nm.

Removal, installation and adjustment of the hood
Bonnet fastening and adjustment elements 1 - hood 2 - buffer. For adjusting the height of the hood. 3 - gas-filled strut 4 - spring 5 - hood hinge 6 - bolt, 20...

Bonnet seals
Hood sealing elements 1 - water collection compartment cover 2 - sealing of the water collection compartment 3 - wing seal 4 - front seal 5 - front seal 6 -...

Removal and installation the tailgate
Removal 1. Remove the tailgate trim, refer to subsection Removal and installation the tailgate trim . 2. Disconnect the rear window heating and wiper plug...

Removal and installation the tailgate hinge
Removal 1. Remove the rear headliner, refer to subsection Removal and installation the rear roof trim . 2. Remove the tailgate –6–, refer to subsection Removal...

Tailgate adjustment
Warning: Before adjusting the tailgate, it is necessary to install the gas-filled strut, refer to the subsection Removal and installation the tailgate . 1....

Removal and installation the tailgate seal
Removal 1. Open the tailgate. 2. Remove the seal –1–. Installation Press the seal –1– as shown in the illustration onto the body fold. Make sure that the...

Removal and installation the tailgate lock
Tailgate lock 1 - tailgate lock 2 - nut, 8 Nm 3 - articulated lever. It is brought out through the connecting rod –4–. 4 - connecting rod. To remove,...

Removal and installation the locking mechanism
Tailgate locking mechanism Removal 1. Remove the tailgate trim, refer to subsection Removal and installation the tailgate trim . 2. Release the lock on the...

Removal and installation the wedge element of the rear door lock
Removal 1. Mark the position of the wedge element of the lock with a felt-tip pen. 2. Loosen nuts –2– and remove wedge element –1–. Installation 1. Install the...

Removal and installation the rear door handle strip
Removal 1. Remove the tailgate trim, refer to subsection Removal and installation the tailgate trim . 2. Remove nuts –1– and bolts –3–. If there is a holder,...

Removal and installation door trim
Door trim Removal 1. Open the door. 2. Remove screw –1– from handle –2–. 3. Remove the handle trim downwards from the door trim –3–. 4. Remove 2 screws –4–. 5....

Door trim insulation
Execution order 1. When removing and installing the shock absorber –1–, take care not to damage it with the hook or plug connections. 2. Glue the insulation...

Adjusting the unlock button
Execution order The release buttons should protrude 0–2 mm when locked.

Removal and installation the front door and adjusting element holder
Front door 1 - holder 2 - bolt, 30 Nm. M8 x 26 3 - bolt, 30 Nm. M8 x 32 4 - Adjusting wedge. Must always be installed 5 - door. The door can also be removed...

Door adjustment
Adjusting the door lock element Adjusting the door's installation depth with a locking element 1. Loosen the lock element screws slightly. 2. Close the door....

Removal and installation of window lift and door glass
Window lifter and door window glass Window door Removal 1. Lower the glass –2– all the way down. 2. Remove the door trim, refer to subsection Removal and...

Removal and installation the window lift motor
Warning: The window lift motor can be removed and installed in any position. Removal 1. Remove the door trim, refer to subsection Removal and installation door...

Removal and installation the front door handle and lock cylinder
Front door handle and lock cylinder 1 - visor 2 - lining 3 - lock cylinder 4 - swivel bracket 5 - door handle 6 - screw, 5 Nm 7 - door lock cover 8 - safety...

Removal and installation the beam of the adjusting elements and the hinges of the rear door
Rear door, beam of adjustment elements 1 - bolt, 30 Nm 2 - rear door 3 - lining. Installed if necessary. Before removing, record the number and thickness of...

Removal and installation the shield and beam of the side reinforcement / window shaft strip
Side reinforcement beam/window shaft strip 1 - window shaft strip 2 - clamp 3 - door 4 - casing 5 - bolt, 8 Nm 6 - amplifier beam Amplifier beam Removal 1....

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: