Side reinforcement beam / window shaft strip
- 1 - window shaft bar
- 2 - clamp
- 3 - door
- 4 - casing
- 5 - bolt, 8 Nm
- 6 - amplifier beam
Amplifier Beam
Withdrawal
1. Remove a beam of adjusting elements of a door, address to subsection Removal and installation of a forward door and the holder of adjusting elements.
2. Turn out bolts -5- and take out a beam of the amplifier -6-.
Installation
1. Glue the side cushion, refer to subsection Installing the side airbag.
2. Install the reinforcement beam -6- and fix it with bolts -5-.
3. Establish a beam of adjusting elements, refer to subsection Removal and installation of a forward door and the holder of adjusting elements.
Window shaft plank
Withdrawal
1. Remove the beam of adjusting elements, refer to subsection Removal and installation of a forward door and the holder of adjusting elements.
2. Unscrew the pin from the clip -2- and remove the clip.
3. Take out the pin (arrow) near the B-pillar door and remove the window shaft bar.
Installation
1. Reinstall the window shaft bar.
2. Insert clamp -2-, slightly press the pin.
3. Press the pin (arrow).
4. Establish a beam of adjusting elements of a door, address to subsection Removal and installation of a forward door and the holder of adjusting elements.
Visitor comments