Withdrawal
1. Remove the tailgate trim, refer to subsection Removal and installation of facing of a door of a back.
2. Remove nuts -1- and bolts -3-. If there is a holder, remove it.
3. Slightly remove the handle bar -6- from the tailgate and disconnect the license plate light connector.
4. Remove the bar.
Installation
1. Insert the plank into the holes.
2. Install holder -2- (if it exists) at the locking mechanism and tighten with an external bolt with a lath.
3. Connect the license plate light connector.
4. Fix the bar with bolts -3- and nuts -1-.
Visitor comments