Removing the bottom trim
1. Open the lid.
2. Remove the 2 fixing screws -1- from the handle cover.
3. Unclip trim -2- using a screwdriver.
4. Remove the cover.
Installation
1. Install trim -2- and secure.
2. Screw the screws -1- into the handle cover.
Removing the top trim
1. Remove the lining at the bottom -2-.
2. Disconnect facing -3- by means of a screw-driver at the left, on the right and at the top.
3. Remove the cover.
Installation
1. Replace the trim -3- and lock it in place on the left, right and top.
2. Install the trim at the bottom -2-.
Visitor comments