Table of contents: 3-door models ↓ 5-door models ↓
3-door models
1. Remove the A-pillar trim, refer to subsection Removal and installation the A-pillar trim.
2. Disconnect the input strip –1– (6 clamps).
3. Remove the entry strip under the side trim.
4. Install the input strip in the reverse order of removal.
5-door models
1. Remove the lower trim of the A-pillar, refer to subsection Removal and installation the A-pillar trim.
2. Disconnect the front input strip –1–.
3. Disconnect the input strip at the holder –5– from the lower trim of the B pillar –2–.
4. Remove the input strip with pin –6– from the rear and disconnect it.
5. Disconnect the bar at the holder –4– and then at the holder –3– from the lower trim of the B-pillar –2–.
6. Remove the bar.
7. Install the input strip in the reverse order of removal.