Removal and installation the threshold strip (Audi A4 B6)

1. It is impossible to dismantle the bar without destroying it. To dismantle it, heat the bar with a hair dryer and carefully remove it upwards.



2. To install the strip, clean the adhesive surface with gasoline, treat with silicone solvent and wipe dry. The car should stand at room temperature for at least 2 hours.

3. Heat the adhesive surface to 40°C with a hair dryer, remove the protective film from the double-sided adhesive tape immediately before installation. Gluing should be done within 90 minutes. Attach the bar and press it. The car should stand at room temperature for 4 hours.