Clutch and drive shaft specifications Warning: Separate characteristics are also given in the text of the Chapter and, if they are mandatory, are highlighted in bold. Common parameters...
General information and clutch device 1 - Flywheel The contact surface facing the friction linings must be smooth and free from oil and grease. Make sure that the centering pins are in a secure...
Removal, installation and clutch check Warning: Clutch installation requires an AUDI-3176 centering mandrel or a common centering tool such as HAZET 2174. Withdrawal 1. Remove the gearbox, refer to...
Removal and installation of the bearing 1 - checkpoint 2 - Spherical pin. Lubricate with MoS 2 lube. Tightening torque for aluminum alloy gearbox: 25 Nm ; with a magnesium alloy gearbox: 18 Nm. 3 -...
Removing air from the hydraulic clutch drive system The clutch hydraulic system must be bled of air if the clutch does not disengage well when a gear is engaged, the clutch pedal does not return back or returns...
Wheel drive shaft device 1 - Bolt, be sure to replace 2 - Clamp, be sure to replace 3 - Protective cover of the outer hinge. Check for cracks and chafing. Before attaching the clamps,...
Removal and installation of a power shaft Withdrawal 1. Remove the cap covering the wheel, the decorative cap or the caps of the wheel bolts. 2. Turn away on an angle 90°a bolt of fastening of the...