Turbocharging — general information Turbocharging is used to improve the filling of cylinders. In other words: turbocharging helps the engine fill the combustion chamber on the intake stroke with...
Turbocharger Basically, a turbocharger consists of two paddle wheels located on the same shaft. Through one of them, the exhaust gases of the engine are removed, depending...
Draft release valve Draft shut-off valve built into the connecting hose (bypass channel) between the suction side and the pressure side of the turbocharger. The meaning of the...
Checking the boost pressure control Checking the boost pressure control solenoid valve 1. Hose routing: first check that all hoses are correctly connected to the valve. 2. Disconnect the valve...
Help with malfunctions Turbocharger Turbine turbocharger (2) driven by the pressure of the outgoing exhaust gases. Impeller (1) on the suction side is driven by a passing shaft at a...
Faulty turbocharger Hose Routing and Location Turbocharger - Exhaust 1 - carbon filter; 2 - ventilation tube of the fuel tank; 3 - return valve of the coal filter; 4 -...
Charge air cooler The fresh air sucked in through the air filter is accelerated in the compressor and compressed. Not only the seal itself, but also located in the exhaust gas...