Cooling system specifications Warning: Separate characteristics are also given in the text of the Chapter and, if they are mandatory, are highlighted in bold. Characteristic Meaning Design...
General information about the cooling system 1 - Heater radiator 2 - Coolant pipeline lower 3 - Expansion tank 4 - Oil cooler 5 — the Inlet pipeline 6 - Lower radiator hose 7 - Upper radiator hose 8 -...
Antifreeze — a means of protection against freezing The cooling system is filled year-round with a mixture of water, antifreeze and anti-corrosion agent. This prevents rust and corrosion, salt deposits and, in...
Coolant replacement The coolant should only be changed if the engine cooling system is repaired, if the coolant was drained. Fluid replacement as part of maintenance is not...
Removal and installation of the thermostat Warning: Vehicles with a pre-set cooling system do not have a conventional thermostat. Withdrawal 1. Drain the coolant. 2. Disconnect the lower coolant hose...
Thermostat check 1. The thermostat turns on the large cooling circuit when the engine warms up. In this case, the thermostat continuously expands, from the size «A» up to size...
Replacing the cooling system hoses Warning: Follow the precautions in Section Checking the condition and replacing the engine compartment hoses, localizing leaks . 1. If, as a result of an...
Removal and installation of a radiator 1. Drain the coolant, refer to Section Coolant replacement . 2. Remove the front bumper, refer to Section Removal and installation of a forward bumper . 3....
Removal and installation of the fan of a radiator Caution: Seals and O-rings must be replaced. 1. Remove the front bumper, refer to Section Removal and installation of a forward bumper . 2. Set the front panel...