Maintenance — carpets and interiors Carpets and mats should be vacuumed regularly. If they are clogged with dirt, remove them from the interior for cleaning and scratching and reinstall only...
Center console — removal and installation Rear section Withdrawal 1. Raise the handbrake lever, lift the latch at the base of the lever handle and pull the handle off the lever. Remove the trim from...
Glove box — removal and installation Note: Later models are equipped with a passenger airbag in place of the glove box. Withdrawal 1. Unfasten the front panel trim on the driver's side, unscrew...
Internal rear-view mirror — removal and installation Mechanical mirror 1. Press the mirror leg down and detach the mirror from the support. 2. To install, set the mirror leg at an angle of 60...90°to the vertical...
Seats — removal and installation Note: This paragraph does not apply to models with side airbags. Front seat Withdrawal 1. Move the seat all the way back and fold the backrest fully forward....
Upholstery — general information Upholstery panels Withdrawal 1. Upholstery panels are fastened either with screws or various plastic clips, latches, etc. 2. When removing any panel, check to...
Seat belts — general information Note: Before working on seat belts on late models equipped with pyrotechnic seat belt pretensioners, read the warnings in paragraph 22 . 1. Periodically check...