Manual transmission specifications General money Type - Mechanical, installed behind the engine, with front wheel drive flanges. Five forward and one reverse gear, all gears synchronized,...
General information about manual transmission The five-speed gearbox is bolted to the rear of the longitudinally mounted engine. In front of the gearbox, a differential is fortified, which transmits...
Gear Shift Mechanism — Adjustment Standard Shift Models 1. Apply the handbrake, raise the front of the vehicle and install the jack stands. Turn on neutral. 2. Remove the heat shields from the...
Manual transmission — removal and installation Withdrawal 1. Select a level, solid area and park the vehicle so that there is enough room to work. Apply the handbrake and place chocks under the rear wheels....
Manual transmission repair — general information 1. Gearbox repair is a difficult task for a car enthusiast. In addition to the need to disassemble and assemble a mechanism with many small parts, exceptional...
Multifunction switch — removal and installation Withdrawal 1. The multi-function switch is mounted on top of the gearbox (pic. 5.1). 2. Apply the handbrake, raise the front of the vehicle, install safety...
Speedometer sensor — removal and installation Withdrawal 1. All gearboxes are equipped with an electronic speedometer sensor on the left side of the gearbox, above the drive flange (pic. 6.1). The device...
Drive shaft flange seals — replacement 1. Apply the handbrake, raise the front of the vehicle and install the jack stands. Remove the corresponding wheel. 2. As described in chapter B, dismantle the...
Input (primary) shaft oil seal — replacement 13. For this operation, the gearbox must be removed as described in paragraph 3 of this chapter. 14. Remove the release bearing and lever as described in...
Switch rod oil seal — replacement 22. Apply the handbrake, raise the front of the vehicle and install safety stands. 23. Turn away a bolt of fastening and remove fastening of draft of the...