22. Apply the handbrake, raise the front of the vehicle and install safety stands.
23. Turn away a bolt of fastening and remove fastening of draft of the mechanism of switching to a rod.
24. Using a small screwdriver, carefully remove the seal from the gearbox housing, being careful not to damage the rod surface.
25. Wipe the seal seat and input shaft. Apply multi-purpose grease to the lips of the gland, slide it onto the stem with the lips facing out. Temporarily wrap the stem with tape to prevent damage to the gland.
26. Evenly press it into place using a suitable head or a cylindrical mandrel, relying only on the hard sealing lips of the stuffing box. Install the oil seal to a depth equal to 1.0 mm from the surface of the gearbox housing.
27. Install the rod on the stem and tighten the bolt.
28. Lower the car.
Visitor comments