1. Hood
2. Buffer for height adjustment. To adjust the hood, turn the bumper out until it touches the fender. When properly adjusted, the buffer is in contact with the radiator frame.
3. Fixing hooks
4. Edge protection
5. Hexagon nut, 15 Nm
6. Blind rivet
7. Air intake. Remove cover to remove. Loosen the Tox bolts, remove the rivet and remove the air intake.
8. Bolt Togh, 3 Nm
9. Facing. To remove, unscrew the 3 clamping washers and remove the trim with 6 brackets from the hood
10. Guide
11. Hood mount
12. Combination bolt, 15 Nm
13. Clamping washer
Joint width: dimension -a- = 2 mm, dimension -b- = 2 mm, dimension -c- = 2 mm. Check joint widths with setting template -3371-.
Visitor comments