1. Cover. Removal: Loosen the front fender liner. Loosen screws. Press the rivet pins in until they click into place. The pin is not fully included. Pull out the pull rivet. On the side, detach the cover on the right and left of the wing. Remove the cover from the vehicle towards the front
2. Hex head bolt 4Nm
3. Amplifier. Remove the cover before removing. Loosen the bolts and remove the booster
4. Blind rivet (5 pieces.). To remove, press the pins not completely, but only until they click. Remove the rivet with the pin. Blow out the completely extruded pin from the side of the amplifier
5. Combination bolt, 23 Nm
6. Crossbar. Remove the cover before removing. Loosen the bolt and remove the cross member
7. Self-tapping screw (10 pieces.), 1.5 Nm
8. Fog lamp cover. Disconnect from the inside of the vehicle and remove. When installing, bring from the outside of the vehicle and push inward
9 Self-tapping screw (3 pcs.), 1.5 Nm
10. Air intake grille
Visitor comments