To open the hood, pull the lock drive handle located on the left under the dashboard. The hood will unlock and open slightly under the influence of the spring.
Approaching the hood from the front, lift it slightly, release it from the lock in the direction of the arrow and open it.
Remove the metal support, insert it into the special longitudinal slot in the lower side of the hood, as shown in the figure on the right, and fix it.
For vehicles with a spring-loaded hood lift, the locking is carried out by a spring.
To close the hood - slightly lift it up, remove the support from the slot, put it in place and slowly but lowering the hood from a distance of approximately 30 cm, drop it - the hood will close under its own weight. Additionally, pressing it from above is not recommended.
For modifications with a spring lift mechanism - overcome the force of the spring, lower the hood down and slam it shut.
Attention: The hood must be closed while driving. Therefore, when closing it, always check the reliability of fixation. If while driving you notice that the hood is slightly open, stop the car and close it.
Visitor comments