Car clutch and gearbox Audi 80 B3

Clutch device
The clutch is a single-disc dry type with a diaphragm pressure spring and hydraulic drive. The clutch housing is bolted to the rear surface of the flywheel,...

Clutch drive
1 - stopper 2 - bearing sleeve Pressed in, press in a vice. 3 - brake pedal 4 - return spring 5 - pedal support 6 - spring 7 - clutch pedal 8 - stopper 9 -...

Possible clutch malfunctions

Removal, installation, checking of the clutch
Removal Remove the gearbox. Loosen the pressure plate mounting bolts sequentially by 1-11/2 turns, removing the load from the pressure plate. Caution: If the...

Bleeding air from the system
The system must be bled if the clutch pedal does not return or returns slowly, or if the hydraulic system has been opened. Since the hydraulic clutch system...

Gear shifter
1 - gear shift lever handle 2 - case 3 - bolt 4 - retaining ring Do not overtighten when installing 5 - spacer sleeve 6 - spring 7 - ball stop Insert the...

Automatic transmission. General information
The AUDI 80/90 can be equipped with an automatic transmission on request. This transmission has 3 forward gears that shift automatically. For the AUDI90 and...

Checking the oil level in an automatic transmission
The correct oil level is essential for the perfect operation of the automatic transmission, so a thorough check should be carried out every 3-4 months. The...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

80(B4, 1991-1996)

80(B3, 1986-1991)

80(B3, 1986-1991, petrol)

80(B2, 1979-1986)