Vehicle drive shafts Audi 80 B3, petrol
Drive shaft specifications
Type - Drive shaft with two CV joints, the inner CV joint is bolted to the gearbox drive flange, the outer one - to the front wheel hub CV joint lubricant Type...
Type - Drive shaft with two CV joints, the inner CV joint is bolted to the gearbox drive flange, the outer one - to the front wheel hub CV joint lubricant Type...
General description of drive shafts
The drive is transmitted from the gearbox drive flanges through the drive shaft by means of inner and outer CV joints. The outer CV joints include alignment...
The drive is transmitted from the gearbox drive flanges through the drive shaft by means of inner and outer CV joints. The outer CV joints include alignment...
Maintenance of drive shafts
Perform the following procedure at the frequency given in " Technical maintenance " at the beginning of the guide. Checking the rubber boots of the CV joint 1....
Perform the following procedure at the frequency given in " Technical maintenance " at the beginning of the guide. Checking the rubber boots of the CV joint 1....
Drive shafts — removal and installation
1. Apply the parking brake, remove the trim from the corresponding front wheel. 2. Loosen the drive shaft nut or bolt. 3. Loosen the wheel bolts. 4. Jack up...
1. Apply the parking brake, remove the trim from the corresponding front wheel. 2. Loosen the drive shaft nut or bolt. 3. Loosen the wheel bolts. 4. Jack up...
Drive shafts — overhaul
1. Clamp the drive shaft (photo) in a vice. 2. Using a suitable punch, knock the cover off the inner CV joint and move the rubber boots toward the middle of...
1. Clamp the drive shaft (photo) in a vice. 2. Using a suitable punch, knock the cover off the inner CV joint and move the rubber boots toward the middle of...
Troubleshooting drive shafts
Vibration and noise in steering at maximum steering angle Drive shaft connections are worn out Noise when engaging the drive, or when accelerating and braking...
Vibration and noise in steering at maximum steering angle Drive shaft connections are worn out Noise when engaging the drive, or when accelerating and braking...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections of other Audi car models:
Transmission: Drive shafts Audi 100 C4 (1990-1994)
Transmission: Drive shafts Audi A4 B7 (2004-2008)
Transmission: Drive shafts Audi A6 C4 (1994-1997)
Transmission: Drive shafts Audi A8 D2 (1994-2002)
Transmission: Drive shafts Audi 100 C4 (1990-1994)
Transmission: Drive shafts Audi A4 B7 (2004-2008)
Transmission: Drive shafts Audi A6 C4 (1994-1997)
Transmission: Drive shafts Audi A8 D2 (1994-2002)
Share information:
- General information
- User manual
- Maintenance
- Troubleshooting
- Power unit
- Engine
- Cooling system
- Heating and ventilation
- Petrol injection
- Diesel fuel system
- Fuel system
- Exhaust systems
- Ignition system
- Transmission
- Clutch
- Car gearbox
- Chassis
- Brake system
- Suspension and steering wheel
- Body
- Body and trim
- Electrical equipment
- Electrical system
- Electrical circuits
- General information
- Repair characteristics
- Maintenance
- Power unit
- Gasoline engine
- Diesel engine
- Engine lubrication system
- Fuel system (gasoline)
- Injection system (gasoline)
- Fuel system (diesel)
- Ignition system
- Cooling system
- Heater
- Exhaust system
- Transmission
- Clutch and gearbox
- Chassis
- Steering
- Brake system
- Car suspension
- Body
- Body elements
- Electrical equipment
- Power devices
- Lighting and appliances
- Electrical circuits
- General information
- User manual
- Maintenance
- Power unit
- Engine 4-cylinder
- Engine 5-cylinder
- Cooling system
- Fuel and exhaust systems
- Ignition system
- Transmission
- Clutch
- Mechanical transmission
- Automatic transmission
- Drive shafts
- Chassis
- Brake system
- Suspension
- Steering
- Body
- Exterior
- Interior
- Electrical equipment
- Equipment and devices
- Electrical circuits