Vehicle steering Audi 80 B3

Steering. General information
The steering system consists of a steering wheel, a steering column, a rack and pinion transmission, steering rods and a hydraulic power steering system. The...

Steering wheel
Cars without airbags 1 - switch with console on the steering wheel 2 - contact with sliding square 3 - steering wheel 4 - spring washer 5 - nut, 40 Nm Unscrew...

Removal and installation the steering wheel
When removing and installing the steering wheel, the front wheels must be in the "straight ahead" position. There are marks on the steering wheel and column...

Steering drive
1 - fastening ring Push it all the way onto the toothed rack and insert the casing into the groove. 2 - casing Can be replaced without removing the steering...

Removal and installation steering rods
The toe-in adjustment must be performed on both steering rods by rotating both threaded elements. The steering tip joints must not have any play. The...

Removal and installation the steering shock absorber
A faulty steering shock absorber will manifest itself when driving on an uneven road as vibration in the steering wheel. Removal Unscrew the steering shock...

Adjusting the steering play
Rack and pinion steering should operate without play from one extreme position to the other. Servo steering is not adjustable. With the car on the ground,...

Bleeding the steering system
The steering system must be bled if the lines have been removed or new fluid has been added. Caution: Drained hydraulic oil must not be reused. Always fill...

Checking the steering system for leaks
If there is no hydraulic oil in the expansion tank, be sure to check the steering system for leaks. Start the engine and let it idle. Turn the steering wheel...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

80(B4, 1991-1996)

80(B3, 1986-1991)

80(B3, 1986-1991, petrol)

80(B2, 1979-1986)