Car front suspension Audi 80 B2

Front suspension specifications
The front suspension is independent, such as "swinging candle", with hydraulic telescopic shock struts, helical cylindrical springs, lower wishbones and a...

Front Wheel Hub Specifications
The front wheel hub is mounted on a double-row radial thrust ball bearing.

Tightening torques of main threaded connections, kgf.m
Shock absorber rod mounting nut in upper support: 5.0. Strut housing nut: 15.0. Nut of the suspension arm to subframe mounting bolt: 6.0. Nut of the bolt...

Removal and installation of shock absorbers and springs
Removal Loosen the wheel hub nut. Bring out the front of the car and shine the wheel. Remove the brake caliper and the brake hose mounting bracket. Hang the...

Removal and installation the anti-roll bar
Removing the anti-roll bar is not particularly difficult. Before installing the anti-roll bar, jack up the front of the car so that you can install the...

Removal and installation suspension arms
Raise the front of the car and remove the wheel. Disconnect the anti-roll bar from the suspension arm. Disconnect the ball joint from the suspension arm....

Adjusting the front wheel alignment angles
Before checking and adjusting the wheel alignment angles, it is necessary. place the car on a level surface; check the air pressure in the tires and, if...

Checking and adjusting the toe of the front wheels
Check and, if necessary, adjust the wheel alignment as follows. Cars with one adjustable steering rod Set the front wheels to the straight-ahead position....

Checking and adjusting the front wheel camber
Check and, if necessary, adjust the front wheel alignment. The camber angle of the wheels is adjusted by moving the ball joints of the suspension arms in the...

Checking the longitudinal tilt angle of the pivot axis
The longitudinal angle of the steering axis is not adjustable. If it is not within the norm, check the condition of the front suspension units and parts and...

Disassembly and assembly of front wheel hubs
Shine the telescopic stand as described above. Remove the brake disc from the hub. Remove the protective cover attached to the suspension spring. Press the...

Front suspension device
Front suspension parts: 1 - nut cover; 2 - shock absorber nut; 3 - support collar, upper; 4 - gasket; 5 - upper support; 6 - support collar, lower; 7 - upper...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

80(B4, 1991-1996)

80(B3, 1986-1991)

80(B3, 1986-1991, petrol)

80(B2, 1979-1986)