The camber angle of the wheels is adjusted by moving the ball joints of the suspension arms in the oval holes of the arms without lifting the front of the car.
Loosen the nuts of the bolts securing the ball joint to the suspension arm.
Install the VW 40 - 200 camber adjustment tool into the lever holes. To adjust the camber of the right wheel, install the tool in front of the lever, and to adjust the camber of the left wheel, install the tool at the rear.
Set the desired camber angle by moving the ball joint in the oval holes of the suspension arm.
Tighten the nuts of the ball joint mounting bolts and check the camber angle again and adjust if necessary.
Check and, if necessary, adjust the front wheel alignment.
The article is a reprint of material from audimanual