Mechanical transmission of a car Audi 80 B3, petrol

Manual transmission specifications
Type - Five forward gears and reverse, synchronizer on all gears, built-in main gear Gearbox code - 012 Relationship Gearbox code AKL AMR ATG AMK AMV ALP ALR...

General description of the mechanical gearbox
The five-speed manual transmission is bolted to the rear of the engine. The front-wheel drive configuration sends power to the differential unit located on the...

Maintenance of manual transmission
Perform the following procedures at the intervals given in " Technical maintenance " at the beginning of the guide. Checking for gearbox leaks 1. Raise the...

Gearbox — removal and installation
Note: If necessary, the engine and gearbox can be removed together as described in Section 1 , and then separate the gearbox. However, this Chapter describes...

Gearbox — overhaul
Repairing a manual transmission unit is a difficult job for the home mechanic. In addition to disassembly and reassembly, clearances must be accurately...

Gear shift lever — removal, overhaul and installation
1. Apply the parking brake, then jack up the front of the vehicle and support it on axle stands. 2. Remove the exhaust system as described in Section 3 . 3....

Gear shift rod — adjustment
1. Apply the parking brake, then jack up the front of the vehicle and support it on axle stands. 2. Engage neutral gear. 3. Remove the gear shift knob and...

Troubleshooting a Manual Transmission
Inefficient synchronization Synchronizer rings are worn out Jumping out of gear The offset retainer spring is weak or broken Worn shift forks or clamps Worn...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

80(B4, 1991-1996)

80(B3, 1986-1991)

80(B3, 1986-1991, petrol)

80(B2, 1979-1986)