Table of contents: Adjusting the height of the headrests ↓ Removal and installation headrests ↓
Head restraints must be adjusted according to height. Effective protection in combination with seat belts is only possible if the head restraints are adjusted to the correct height.
Adjusting the height of the headrests
To do this, take them with your hands on both sides and pull them up to the appropriate height or lower them down in the opposite order.
The top edge of the headrests should be at eye level.
Removal and installation headrests
Lift the protective cover upwards, use a small screwdriver to remove the mounting springs from the grooves as shown in the figure, and pull out the headrests.
When reinstalling them, first install the fastening springs into the grooves of the protective cover with the loops facing outwards, then insert the headrest rods into the guide holes and press down until you hear the lock click. Lower the protective cover as low as possible.