Tailgate locking mechanism
Withdrawal
1. Remove the tailgate trim, refer to subsection Removal and installation of facing of a door of a back.
2. Remove the lock on the vacuum hose connector -1- and disconnect it from the adjusting element -2-.
3. Disconnect drive rod -3-.
4. Disconnect the clamps of the element -1- (arrow illustration) and pull the element down.
5. Loosen the nuts (arrows in the illustration) and remove the locking mechanism -2- from the tailgate.
Installation
1. Insert the locking mechanism into the tailgate and secure it with nuts to a torque of 8 Nm.
2. Enter the locking mechanism from below into the tailgate and fix.
3. Insert drive rod -3-.
4. Connect the adjusting element to the vacuum hose and fix.
5. Reinstall the tailgate trim, refer to subsection Removal and installation of facing of a door of a back.
Visitor comments