Connecting the fuel pump remote control for testing and the necessary accessories
- 1 push contact switch
- 2 "crocodile" clip (size corresponding to the battery pole)
- 3 built-in fuse in the wire: housing and 8 A fuse
- 4 flat plug that can be installed instead of the fuel pump fuse
- 5 single-core cable with a cross-section of 1.5 mm² and a length of 5 m
Petrol engines
Remote control is required in cases where the electric fuel pump must supply fuel when the engine is off.
1. Remove fuse #28 for the fuel pump in the fuse box (the fifth fuse from the top, refer to the illustration).
2. Insert the flat-plug remote control into the fuse contacts in the fuse box.
3. Connect the remote control with an alligator clip to the positive (+) terminal of the battery.
4. When the remote control push switch is turned on, the fuel pump should pump fuel, which should be audible.