Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the glove box, refer to the subsection Removal and installation the glove box.
2. Remove the additional resistor, refer to the subsection Removal and installation an additional resistor.
3. Disconnect the plug (A) from the fan (B). Remove the fan downwards from the heater (arrow on the illustration).
4. If necessary, unscrew the 2 bolts securing the fan motor to the base plate.
Installation
5. Insert the fan into the heater.
6. Secure the plug (A).
7. Install additional resistor, refer to subsection Removal and installation an additional resistor.
8. Install the glove box, refer to the subsection Removal and installation the glove box.