Table of contents: Removal ↓ Installation ↓
Removal
Remove plugs 1 (fig. 12.84) closing screws.
Remove two screws 2 (fig. 12.84). Pull the side trim in the direction of arrow A (fig. 12.84), until pin 3 comes out of groove 4.
Pull the extension part of the side trim out of the two brackets in the direction of arrow B (Fig. 12.84).
Installation
Installation is performed in the reverse order of removal. Fasten the side trim with bolts, tightening them to a torque of 2.5 Nm.
