The interior elements of the Audi A6 car body include seats, instrument panel, center console, interior trim elements, heating and air conditioning systems. Here are instructions for assembling / disassembling elements of the interior of the car.
Interior door trim panel Withdrawal 1. Release the mounting clip and remove the trim panel. 2. Loosen the fixing screws (arrows) and remove the handle. 3. Remove the power window...
Door window frame Withdrawal 1. Remove the inner door trim panel. 2. Remove the mounting clips, wire mounts and insulating panel. 3. At the back door, disconnect the cable from...
Door handle and lock elements Withdrawal Internal door opening handle See subsection 12.9 . Outside front door handle 1. Remove the glass frame and protective cover, if necessary. 2. Raise...
Elements of the rear door lock Withdrawal 1. Remove the top trim panel (arrows show mounting clips). 2. Remove the side trim panels. 3. Remove the fixing screws on the sides and top of the...
Top hatch To repair the top hatch, it is recommended to contact a specialist. The socket wrench is attached to the cover. On models with an electric sunroof, use the...
Exterior trim elements Wheel arch inserts and underbody panels. Mounting screws, nuts and clamps are used to fasten these elements. Decorative stripes and badges Adhesive tape is...
Removal and installation of seats Withdrawal Front seats with mechanical adjustment Loosen the seat mounting bolts by sliding it back and forth if necessary and remove the seat. Power front...
Front seat belt tensioner Elements of the security system "Prokon-ten" (Audi 100 models) 1. Stop block 2. Stop plate 3. Right seat belt tensioner cable tube 4. Relay box 5. Bracket 6....
Elements of seat belts Front seat belts (Audi 100 models) Withdrawal 1. Remove the decorative strips and unscrew the fixing screws (indicated by arrows) body trim panels. 2. Remove...
Trim panels Interior trim panels Various latches and rivets, as well as mounting screws, are used to fasten the trim panels. Before removing a panel, check that other...
Center console Withdrawal 1. Remove the mounting clip and remove the handle from the handbrake lever. 2. Remove trim panel. 3. Loosen the front and rear fixing screws. 4....
Dashboard Models with airbag module 1. Body 2. Dashboard 3. Fixing nut 4. Mounting bracket 5. Latch Withdrawal 1. Remove the center console. 2. Remove the steering...
Elements of the heating and ventilation system Control Panel Withdrawal 1. Remove the center console. 2. Loosen the fixing screws (indicated by arrows) and remove the panel. 3. Remove the panel and...