General description of clutch The clutch is located between the engine and the gearbox and is designed for short-term separation and smooth connection of the engine crankshaft and the...
Main Clutch Components 1.0. The main components of the clutch: 1 - flywheel. On its surface, which adjoins the friction lining of the driven disk, there should be no grooves, oil and...
Clutch pedal and master cylinder 1.0b. Clutch pedal and master cylinder: 1 - pedal support bracket 2 - axis of the clutch and brake pedals. The notch on the axle must face the clutch pedal...
Clutch Components 1.0v. Clutch Components: 1 - expansion tank with brake fluid 2 - supply hose 3 - pipeline 4 - pedal bracket 5 - clutch pedal 6 - bolts of fastening of the main...
Clutch — removal, installation and inspection Withdrawal 1. Remove a transmission, the corresponding chapter see. 2. Mark the position of the pressure plate on the flywheel with a marker or paint. 3. Stop...
Clutch master cylinder — removal and installation Attention! If a failure of the clutch master or slave cylinders is suspected, it is necessary to check their functioning before proceeding with their...
Clutch slave cylinder — removal and installation Withdrawal 1. Remove the rear section of the engine protective cover. 2. Jack up the front of the car, place it on jack stands, remove the front left wheel and...
Clutch Actuator — Bleeding Air from the clutch drive must be removed if the clutch pedal does not return to the upper position or takes this position slowly, as well as in cases where...