The front suspension on the Audi A6 is completely independent and uses telescopic shock absorbers, springs and an anti-roll bar. This section provides instructions for repairing the front suspension.
Front wheel bearings Replacement 1. Remove the suspension strut. 2. Press out the hub and bearing. 3. Clean the bearing and hub and inspect them for wear or damage. 4. Press the...
Front suspension strut Withdrawal 1. Loosen the hub mounting bolt. 2. Remove the mounting bolts and nuts securing the anti-roll bar to the body. 3. Remove the wheel and hub bolt....
Front shock absorbers Withdrawal 1. Mark the mounting position of the upper shock absorber mount on the suspension strut upper mounting plate. 2. Loosen and remove the nut on the...
Lower arm front suspension Withdrawal 1. Remove the anti-roll bar. 2. Remove the corresponding front wheel. 3. Unscrew the nut and remove the bolt securing the arm to the suspension...
Stabilizer bar of the front suspension Withdrawal 1. When removing the anti-roll bar, the vehicle must be on the ground. 2. Unscrew the fixing bolts and remove the tube with wires to the side, if...
Front suspension crossbar Withdrawal 1. Remove the front wheels. 2. Support the rear of the engine or use a hoist for this purpose. 3. Unscrew the fixing nuts and remove the bolts...