Withdrawal
1. Mark the mounting position of the upper shock absorber mount on the suspension strut upper mounting plate.
2. Loosen and remove the nut on the shock absorber piston rod.
3. Unscrew the three fixing nuts and remove the upper shock absorber support.
4. Turn the steering wheel so that the shock absorber piston rod is in the center of the hole on the upper strut mount.
5. Remove the shock absorber mounting sleeve and rubber stop.
6. Unscrew the fixing cap and remove it.
7. Remove shock absorber.
Installation
Installation is carried out in the reverse order of removal.
1. Tighten the fixing cap to the required tightening torque.
2. Install the top support and tighten the fixing nut.
3. Install washers and new mounting nuts.
4. Align the marks made earlier and tighten the fixing nuts.
5. Install the cover with the arrow facing out.
Visitor comments